<rp id="ahrxo"></rp>
      1. <em id="ahrxo"></em>

        <dd id="ahrxo"></dd>

        Precision cutting creates high-end products Tianchen laser machine entered the western end of the Silk Road-Spain

        04, 2020

        by tianchen01

        Precision cutting creates high-end products

        Tianchen laser machine entered the western end of the Silk Road-Spain

        With the rapid development of the industry, the demand for more high-speed and efficient processing tools is also increasing. Laser cutting machine can be used to cut stainless steel products such as stainless steel crafts, decorations, stainless steel cutlery, fruit trays, etc. Due to the good processing quality of laser cutting machine, no burrs on the edges, and high processing efficiency, it has been widely used in the production process of metal crafts. Metal crafts made with laser cutting machines are also safer, more beautiful, and more suitable for daily use.


        Our customers are from Spain. They are in the business of metal kitchen utensils and have very strict requirements on the cutting effect.

        Tianchen Laser pays attention to the quality control of laser machines. Through advanced technical means, each component of the machine is strictly tested. At the same time, all important accessories are selected from world-renowned brands. Ensure that the machine keeps running smoothly and the accuracy remains unchanged for 5 years.


        The advantages of laser cutting machine over other metal cutting equipment are as follows:

        1. High cutting quality

        Laser cutting presents certain advantages over plasma cutting as this process is more precise and uses less energy when cutting steel and aluminum sheets. In addition,the power of the fiber laser can reach 12000w or even higher, and the laser capability is close to or even surpasses the plasma cutting machine, and has the ability to cut through thick metal plates.

        It can realize precise cutting of workpieces with small material volume and high precision. Furthermore, it creates narrow slits (the width of the slit is generally 0.1-0.2 mm), and smooth cutting edge, the roughness of the cutting surface is generally controlled within Ra6.5. Normally, laser cut metal products has no need for secondary rework.

        2. High cutting efficiency

        Laser cutting has obvious advantages over saw cutting and waterjet cutting in terms of speed. As a flexible, non-contact, profiling tool, the laser can cut from any point in the material to cut in any direction which the sawing cutting is difficult to reach. The speed of waterjet cutting is extremely slow, and carbon steel cut by waterjet is easy to rust, water pollution is serious.

        3. Low operation cost

        There is no "cutting tools" in touch with the material to be processed during laser cutting so there is no tool wear of the conventional cutter. Computer programming can be used to cut products of different shapes to maximize the utilization of materials so as to reduce the metal wastes. The metal to be cut directly and does not need to be fixed by a fixing device, thereby ensuring flexibility and maneuverability in the laser cutting process. The control software comes with a correction system, which can plan the cutting position according to the placement position.Furthermore, the vibration is small and pollution-free during the laser cutting process, which effectively protects the heath of the operator.

        As a technological revolution in metal processing, the fiber laser cutting machine is the "Core component" in sheet metal processing. It has a high degree of flexibility, fast cutting speed, high production efficiency and short product production cycle. Looking forward to future development, the trends of high power, high precision, intelligence, and special materials are gradually becoming clear. Believe that industrial art works in big cities are not uncommon.A clean and tidy processing environment, our laser machine helps you maintain.

        Please check our work site from Spanish customers :

        The machine works perfectly, the customer sends good feedback:




        Best-seller Metal Sheet Fiber Laser Cutting Machine TC-F

        The whole machine adopts 12-16mm plate welding bed, rack and gear drive-system, partition dusk removal system, and easy-to-learn Cypcut software. This machine cutting precision is up to 0.01mm, speed up to 140m/min, it is the best choice for 1kw-6kw users to manufacture economically. The machine mainly apply for stainless steel, carbon steel, alloy steel, spring steel, copper plate, aluminum plate, titanium and other metal sheet. 

        Working Area3000*1500mm4000*2000mm6000*2000mm6000*2500mm
        Positioning Accuracy±0.03mm±0.03mm±0.03mm±0.03mm
        Repositioning Accuracy±0.02mm±0.02mm±0.02mm±0.02mm
        Max Movement Speed140m/min140m/min140m/min140m/min
        Laser Power1000-6000W1000-6000W1000-6000W1000-6000W
        Working TableBlade Working TableBlade Working TableBlade Working TableBlade Working Table
        Max Acceleration1.4G1.4G1.4G1.4G

        If you want to get the same machine,or a better one.Please contact us or leave a message to us quickly, we will let you enjoy this service as soon as possible !

        Leave a comment

        your email address will not be published. required fields are marked *

        PREVIOUS No Data
        Our fiber laser cutting machine has been favored by Indian customers NEXT